Self Ventilating LOCKERBASKET®

Typical LOCKERBASKET® Setup

The ideal Clothes Storage Unit – the clothing is suspended full length below the basket exposing it to circulating fresh air. Clothing hangs below the basket allowing the unit to be near level. LOCKERBASKETS® are furnished with six hooks and come complete with guide bolts, vinyl cushion tipped clothes hooks and a coat hanger. Hook bales are positioned under the basket to maximize storage area. The entire unit is epoxy coated after fabrication.

Request Information
SKU: MS-600 Category:

Downloads

Specifications

Equipment Provided per LOCKERBASKET® 1 wire basket and hanger
Base Length 14" 356 mm
Base Width 14" 356 mm
Depth 159 mm 6.25"
Material
  • Number 12-gauge steel wire welded to 4-gauge steel rod frame.
  • Entire basket and accessories finished in light gray epoxy powder coating after fabrication.
Construction
  • All wire intersections individually welded.
  • Baskets designed to have no interior obstructions. Also designed to slide vertically within the hanger-hook assembly.
Coat-Hooks Six-(6) Hook unit, fabricated from 5/16 inch rod with rounded tips, and vinyl tip guards, designed with integral stops on vertical portions for easy access to hooks.
Garment Hanger Fabricated from No. 7-gauge wire, finished in light gray epoxy powder coating after fabrication, with two vertical supports each affixed to bottom of LOCKERBASKET® with an integral hinge.
Performance Tests Manufacturer shall submit, on request, performance tests for operating parts of clothes storage system.
Installation System to be installed in accordance with The Moore Company, Inc.'s details and instructions and all applicable Codes, Regulations and Laws.